Make a Clear White Lacquer Dining Table Natural Wood
White lacquer dining table – Color stain or varnish leaves a mask color on wood beads and may hide or distort the beauty of wood. Place the table in a well-ventilated place. Turn off all open flames, including pilot lights, candles or lit cigarettes. Wear goggles and an organic cartridge respirator. Clean wooden table with a tack cloth to remove any dust.
Fill a spray paint white lacquer dining table sanding sealer. Adjust the nozzle of the gun to a horizontal plane jet. Change the direction of the gun nozzle at a vertical fan spray to apply sealant to the legs, and then let the sealer to dry completely, usually 45 to 60 minutes. Wrap the sandpaper around 320 grit sanding block and sand the surface of the table. Fill a lacquer paint sprayer and the appropriate amount of lacquer thinner as prescribed by the manufacturer of the lacquer.
Set the adjustment knob on the gun to a pattern of wide range. Point the gun on the table at an angle of 90 degrees, 6 to 8 inches of the surface. Wipe the lacquer finish with the number 0000 steel wool to make the surface smooth. Wipe down with a tack cloth to remove any dust. Spray a second coat of lacquer using the same method as the first layer. After spraying the final coat of white lacquer dining table, let the table dry for 24 hours before rubbing with steel wool.